BMFNR - ACRYLIC LATEX ENAMELIZED HOUSE PAINT, W 258
- MSDS: BMFNR
- Manufacturer: AMERITONE PAINT CORP
- Product Name: ACRYLIC LATEX ENAMELIZED HOUSE PAINT, W 258
- National Stock Number: 8010-00N024147
Product Identification
Product ID:ACRYLIC LATEX ENAMELIZED HOUSE PAINT, W 258
MSDS Date:11/20/1987
FSC:8010
NIIN:00N024147
MSDS Number: BMFNR
Responsible Party
COMPTON, CA 90221
US
Emergency Phone: 213-639-6791
Info Phone: 213-639-6791
Cage: FO133
Contractor
Telephone: 310-639-6791
Cage: FO133
Ingredients
TITANIUM OXIDE; (TITANIUM DIOXIDE).
CAS: 13463-67-7
RTECS: XR2275000
Fraction By Weight: 0-30%
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 TDUST; 9293
0.1 @
CAS: 57-55-6
RTECS: TY2000000
Fraction By Weight: <1%
OSHA PEL 6 MG/M3
ACGIH TLV: 10 MG/M3 TDUST
11.4 @ 68F.
CAS: 1336-21-6
RTECS: BQ9625000
Fraction By Weight: <1%
OSHA PEL 35 PPM STEL
ACGIH TLV: 25 PPM
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
DIATOMACEOUS EARTH
CAS: 68855-54-9
Fraction By Weight: <1%
OSHA PEL 6 MG/M3
ACGIH TLV: 10 MG/M3 TDUST
PROPIONIC ACID, 2-METHYL-, MONOESTER WITH
CAS: 25265-77-4
RTECS: UF6000000
Fraction By Weight: <5%
MERCURY, (ACETATO) PHENYL-;(PHENYLMERCURIC ACETATE)
CAS: 62-38-4
RTECS: OV6475000
Fraction By Weight: <1%
OSHA PEL .01MG/M3;.03STEL(HG)
ACGIH TLV: .01 MG/M3 (HG)
EPA Report Quantity: 100 LBS
DOT Report Quantity: 100 LBS
ATTAPULGITE CLAY
Fraction By Weight: <1%
PRODUCT DURING WELDING & FLAME CUTTING ON
RTECS: 9999999ZZ
OF OVERSPRAY & SANDING DUST. WHEN USED IN
RTECS: 9999999ZZ
REMOVE A COMBINATION OF PARTICULATES & VAP. WHEN USED
RTECS: 9999999ZZ
USE RESPS WHEN FLAME CUTTING, WELDING,
RTECS: 9999999ZZ
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:BREATHING IRRITATION OF
RESPIRATORY TRACT, HEADACHE, NAUSEA, DIZZINESS. SKIN/EYE:PRIMARY
IRRITATION. CHRONIC:PROLONGED AND REPEATED BREATHING OF SPRAY MIST
AND/OR SANDING DUST OVER A PERIOD OF Y EARS MAY CAUSE DUST DISEASE
OF THE LUNGS.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:INHAL:MOVE TO FRESH AIR. EYE:FLUSH IMMEDIATELY WITH LARGE
AMOUNTS OF WATER FOR AT LEAST 15 MINUTES. CALL MD. SKIN:REMOVE WITH
SOAP & WATER. REMOVE SOILED CLOTHING. INGEST:DRINK 1 OR 2 GLASSES
OF WATER TO DILUTE. DO NOT INDUCE VOMITING. CALL MD IMMEDIATELY.
TREAT SYMPTOMATICALLY.
Fire Fighting
Flash Point:NONE
Lower Limits:SEE ING
Extinguishing Media:CO*2, DRY CHEMICAL FOAM OR OTHER NFPA APPROVED
METHOD FOR TREATING A CLASS B FIRE.
Fire Fighting Procedures:SUMMON PROFESSIONAL FIREFIGHTERS. WEAR
NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP. WATER SPRAY MAY BE
INEFTIVE. IF WATER IS USED, FOG NOZZ ARE PREF.(SUPDAT)
Unusual Fire/Explosion Hazard:DUE TO PRESS BUILD-UP, CLSD CNTNRS
EXPOSED TO EXTREME HEAT MAY EXPLODE. DURING EMERGENCY CNDTNS,
OVEREXP TO DECOMP PRODS MAY CAUSE HLTH HAZ. SYMPS MAY (SUPDAT)
Accidental Release
Spill Release Procedures:WASH WITH WATER. BEFORE ATTEMPTING CLEAN-UP,
REFER TO HAZARD CAUTION INFORMATION IN OTHER SECTIONS OF THIS MSDS.
CONTAIN SPILLED MATERIAL AND REMOVE WITH INERT ABSORBENT. STORE IN
CLOSED CONTAINER UNT IL PROPERLY DISPOSED OF.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:STORE BELOW 110F AND KEEP FROM
FREEZING. KEEP CONTAINER CLOSED WHEN NOT IN USE. DO NOT REUSE EMPTY
CONTAINERS.
Other Precautions:DO NOT TRANSFER CONTENTS TO BOTTLES OR TO OTHER
UNLABELLED CONTAINERS. DO NOT GET IN EYES. KEEP OUT OF REACH OF
CHILDREN.
Exposure Controls
Respiratory Protection:ALL RESPS MUST BE NIOSH/MSHA APPRVD. DO NOT
BREATHE VAPS, SPRAY MIST/SANDING DUST. WHEN SPRAY APPLIED IN
OUTDOOR/OPEN AREAS W/UNRESTRICTED VENT & DURING SANDING/GRINDING
OPERS, USE MECH FILTER RESP TO REMOVE SOLID AIRBORNE PARTICLES
(ING 9)
Ventilation:USE ONLY W/ADEQ VENT. PROVIDE GEN DILUTION OR LOC EXHST
VENT IN VOL & PATTERN TO KEEP AIR CONTAM CONC BELOW (SUPP DATA)
Protective Gloves:NOT REQUIRED.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE REQUIRED.
Work Hygienic Practices:REMOVE AND WASH SOILED CLOTHING BEFORE REUSE.
WASH HANDS BEFORE EATING, SMOKING OR USING THE RESTROOM.
Supplemental Safety and Health
FIRE FIGHT PROC:IF EXPOSED TO FIRE OR EXTREME HEAT, WATER SHOULD BE
USED TO COOL CLSD CNTNRS/PVNT PRESS BUILD-UP OR POSS AUTO-IGNIT.
EXPLO HAZ:NOT BE IMMED APPARENT. GET MD. VENT:CURRENT APPLIC SAFETY
& HLTH STANDARDS IN MIXING, APPLIC & CURING AREAS & TO REMOVE
SANDING DUSTS OF DRIED COATING & DECOMP (ING 8)
Chemical Properties
HCC:N1
Boiling Pt:B.P. Text:212F,100C
Vapor Pres:SEE ING
Vapor Density:HVR/AIR
Spec Gravity:1.05-1.31
Evaporation Rate & Reference:SLOWER THAN ETHER
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:65-70
Stability
Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:MAY CAUSE HAZARDOUS FUMES WHEN HEATED
TO DECOMPOSITION. FUMES MAY CONTAIN CO*2 & NO*X.
Disposal
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE, AND
FEDERAL REGULATIONS INCINERATE ONLY IN APPROVED FACILITY. DO NOT
INCINERATE CLOSED CONTAINERS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.